Imagen ilustrativa · Illustrative image01
Checking fixtures & gages
Checking fixtures, holding fixtures, go/no-go gages and weld fixtures. Designed, machined, assembled and delivered with a qualification report.
See details
Puebla, Mexico · Since 2003
Precision in every part.
Confidence in every delivery.
Checking fixtures, tooling and CNC machining in Puebla, Mexico for the automotive industry. From your drawing to the finished part. Quotes in 24–48 hours.
20+ yrs
Building precision tooling
6 tier-1
Automotive suppliers served
24–48 h
Committed RFQ turnaround
11 machines
In-house, nothing farmed out
Building for the Mexico plants of
Tenneco
Kautex
Fischer
PWO
Plastic Omnium
Pactiv Evergreen
01 / What we do
Six specialties. One standard of precision.
We are not a shop that does everything. We are a shop that does tooling, dimensional control and precision cutting, and machines whatever that tooling needs.
Imagen ilustrativa · Illustrative image
Imagen ilustrativa · Illustrative image02
Tooling & dies
Die inserts, punches, dies, shims and hydroforming components. Hardened tool steel, wire-cut where a sharp inside corner is not negotiable.
See details
03
CNC machining
Live-tool turning and 3- and 4-axis milling. One-off parts, critical spares and short runs where lead time is the whole point.
See details
04
Wire EDM
Wire erosion for geometry no end mill can reach: internal profiles with sharp corners, already-hardened inserts and fine fits with no distortion.
See details
05
3D scanning & reverse engineering
Structured-light scanning, CAD reconstruction and dimensional reports against nominal. For when the part exists but the print does not.
See details
Imagen ilustrativa · Illustrative image06
Sheet metal cutting & bending
In-house shear and press brake for sheet work to size, plus welding and fabrication for structures, racks and guarding.
See detailsThe shop floor
This is what it looks like inside
Our own plant in Puebla, marked floor and machines in the open. No renders: this is the shop your part comes out of.
Wire EDM · Open capacity
The cut no end mill can make
Wire EDM cuts already-hardened steel, leaves an effectively sharp inside corner and puts zero force on the part.
It is one of our most available processes right now, so a wire job gets in fast. And there is no minimum quantity: we cut from a single piece.
Hardened steelSharp cornersNo cutting forceFrom 1 piece
- Travels X · Y · Z
- 600 × 400 × 310 mm
- Workpiece weight
- up to 1,500 kg
- Taper
- 15°
- Wire diameter
- 0.1 – 0.3 mm
- Minimum quantity
- 1 piece
Open capacity this week
We have machine time open on these processes. Urgent work goes straight in, no queue.
Corte por hilo (EDM)Corte y doblado de láminaFresado en VF-9
02 / For US buyers
How we work with US customers
Most of our English-speaking customers are US- and German-owned plants operating inside Mexico. They buy locally, in pesos or dollars, with no customs step and no freight lead time. If that describes your operation in Puebla, Tlaxcala or the surrounding corridor, we are a same-week supplier.
Shipping directly to the United States
We can quote in USD and we can ship to the United States, but we will be straight with you: our track record is with plants inside Mexico, not with cross-border programs. We would rather tell you that up front than discover a customs problem after your part is already machined.
So if your part ships to a US address, tell us the destination and the volume in your first message. We will coordinate the logistics with you explicitly and put the terms in writing before you commit — instead of quoting a landed cost we cannot yet defend.
Time zone and language
Puebla is on US Central Time. That means same-business-day answers, not overnight lag, and a call at 9 a.m. your time reaches a person on the shop floor. Our engineering and quoting is handled in English and Spanish.
What we are good at
Low-volume, high-difficulty work: checking fixtures, hardened tooling components, spares with no drawing, and short-run precision parts. If you need millions of turned parts at the lowest possible piece price, we are not the right shop and we will say so on day one.
03 / How it works
From print to part in five steps
01
You send the file
PDF, DWG, STEP, or a photo of a paper drawing. If no model exists, we scan the part ourselves.
02
Same-day engineering review
We check manufacturability, tolerances and material. If something does not close, you hear it before we quote — not after we machine.
03
Formal quote in 24–48 hours
Price, lead time and scope in writing. No moving numbers halfway through the job.
04
Production with traceability
Every job carries a job number with material records and process evidence attached to it. You can ask for status by number, not by description.
05
Delivery with dimensional evidence
Parts ship with their measurement report. Fixtures ship qualified against the master part.
05 / Questions
What buyers ask before sending the first print
How fast do you quote?
Within 24 to 48 business hours of receiving a complete file. If the drawing is incomplete or a tolerance cannot be held, we tell you the same day instead of leaving you waiting.
Do you take one-off parts or only production runs?
Both. A large share of our work is single parts: a broken insert, a spare the original supplier no longer makes, a new fixture. There is no minimum quantity.
I only have the part, not a drawing. Can you work from that?
Yes. We scan the part with structured light, rebuild the CAD model and quote from there. You get the model, not just the copied part.
Can you invoice in US dollars?
Yes, we quote and invoice in USD or MXN. For parts shipping to a US address, tell us the destination in your first message so we can coordinate logistics explicitly rather than guessing at a landed cost.
Where are you and who do you deliver to?
San Felipe Hueyotlipan, Puebla, Mexico — inside the Puebla automotive corridor, on US Central Time. We deliver to plants in Puebla and Tlaxcala and ship nationwide within Mexico.