Torno CNC Okuma GENOS L250-II e
Ø 220 × 290 mm
Barra Ø 46 mm · torreta de 12 herramientas
Precision turning, short runs and repeat parts
Service 03
CNC machining
Live-tool turning and 3- and 4-axis milling. Our strength is not volume — it is the difficult part somebody needs fast and properly measured.
CNC turningLive tooling3-axis milling4-axis millingManual turning
Approach
One less setup, one less error
A live-tool lathe lets us turn, mill and drill without taking the part out of the chuck. Every setup eliminated is a concentricity error that never happens and half an hour of setup you are not billed for.
For geometry that needs multiple faces, the fourth axis does the same job: index, machine, continue — no re-indicating.
That is what lets us deliver one-off parts and short runs on lead times you normally only see in volume production.
C axis4th-axis indexingShort runsOne-off parts
Lathes and machining centres
Live-tool turning and milling with travels up to 2.1 m.
Torno CNC Haas ST-25Y
Ø 267 × 572 mm
Eje Y ±50.8 mm · eje C · herramientas vivas · barra Ø 76 mm · chuck 10"
Turns, mills and drills in one setup: fewer re-clampings, less error
Imagen ilustrativa · Illustrative image
Centro de maquinado Haas VF-9
2134 × 1016 × 762 mm
Recorrido de 2.1 m: dispositivos y herramentales grandes
Large fixture base plates and big-format tooling
Centro de maquinado Haas VF-5
1270 × 660 × 635 mm
Mesa amplia para piezas medianas
Fixture components, sub-plates and short-run parts
Centro de maquinado Haas VF-4
1270 × 508 × 635 mm
Trabajo general de fresado
Inserts, shims, bases and tooling components
Imagen ilustrativa · Illustrative image
Haas Mini Mill
406 × 305 × 254 mm
Piezas chicas y trabajos rápidos
Small components without tying up a large machine
Materials
What we cut
01
Carbon steels
101810454140A36
02
Tool steels
D2O1A2H13S7
03
Stainless steels
304316420
04
Aluminums
606170752024
05
Other materials
BronceLatónNylonPOM / DelrinUHMWG-10
Do not see your material? Ask. If we do not run it, we tell you immediately rather than taking the job and finding out later.
Machining questions
Is there a minimum quantity?
No. We machine from one piece. A large share of our work is unique spares and prototypes.
What file formats do you accept?
STEP, IGES, DWG, DXF, STL, CATPart and PDF. If all you have is a paper drawing, send a photo — we will tell you whether it is enough to quote.
Do you provide dimensional reports?
Yes, and they are included on dimensional-control parts. For everything else they can be added; it is stated in the quote.
Do you run production quantities?
Yes, and we have the capacity to sustain it. Just be clear about volume and frequency up front so we can reserve machine time and quote a production price rather than a one-off price.